NES-150W series Efficient single switching power supply
Features:
·AC input voltage range selected by switch
·Small volume,low weight,high efficiency
·Protections:short circuit/over load/over voltage
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
Model |
NES-150-5 |
NES-150-12 |
NES-150-15 |
NES-150-24 |
NES-150-48 |
|
output |
DC voltage |
5V |
12V |
15V |
24V |
48V |
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
|
Rated current |
30A |
12.5A |
10A |
6.5A |
3.2A |
|
Current range |
0~30A |
0~12.5A |
0~10A |
0~6.5A |
0~3.2A |
|
Rated power |
150W |
150W |
150W |
156W |
153.6W |
|
Ripple&noise |
80mvp-p |
120mvp-p |
120mvp-p |
120mvp-p |
200mvp-p |
|
DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
±10% |
|
input |
Voltage range |
90~132VAC/180~264VAC(selected by switch),255~373VDC |
||||
frequency |
47~63HZ |
|||||
AC current |
3A/115VAC,2A/230VAC |
|||||
efficiency |
80% |
83% |
83% |
84% |
86% |
|
Inrush current |
Cold start current30A/115VAC,45A/230VAC |
|||||
Leakage current |
< 2mA/240VAC |
|||||
protection |
overload |
Rated output power110%~150% start over load protection |
||||
protection type:hiccup mode,auto-recovery after fault condition is removed |
||||||
Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
54.8~56.6V |
|
protection type:hiccup mode,auto-recovery after fault condition is removed |
||||||
----- |
----- |
|||||
----- |
||||||
environment |
Working temp,humidity |
-20℃~+60℃,20%~90%RH |
||||
Storagetemp,humidity |
-40℃~+85℃,10%~95%RH non-condensing |
|||||
Withstand vibration |
10~500HZ,2G10min/1cycle,period for 60 minutes,each axes |
|||||
safety |
Withstand voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
||||
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
|||||
Fitstandard |
Safety standard |
Compliance toUL1012 |
||||
EMC standard |
Compliance toEN55022,CLASSA |
|||||
others |
Dimension |
199*98*38mm(L*W*H) |
||||
Weight/packing |
0.6kg/30pcs/19kg/0.034 m³/1.2CUFT |
|||||
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
如果您有任何关于合作的报价或有任何查询,请随时给我们发电子邮件 info@hwele.net或使用下面的查询表格。我们的销售代表将在24小时内与您联系。感谢您对我们的产品感兴趣。