【Prev Products】 | 【Next Products】 |
S-35W series normal single switching power supply
Features:
·AC input voltage range selected by switch
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
Model |
S-35-5 |
S-35-12 |
S-35-15 |
S-35-24 |
|
output |
DC voltage |
5V |
12V |
15V |
24V |
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
|
Rated current |
7A |
3A |
2.4A |
1.5A |
|
Current range |
0~7A |
0~3A |
0~2.4A |
0~1.5A |
|
Rated power |
35W |
36W |
36W |
36W |
|
Ripple&noise |
100mvp-p |
120mvp-p |
120mvp-p |
120mvp-p |
|
DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
|
input |
Voltage range |
90~132VAC/180~264VAC(selected by switch),255~373VDC |
|||
frequency |
47~63HZ |
||||
AC current |
0.8A/115VAC,0.45A/230VAC |
||||
efficiency |
72% |
76% |
76% |
78% |
|
Inrush current |
Cold start current18A/115VAC,36A/230VAC |
||||
Leakage current |
< 3.5mA/240VAC |
||||
protection |
overload |
Rated output power115%~150% start over load protection |
|||
protection type :part layer type current limit,auto-recovery after fault condition is removed |
|||||
----- |
----- |
||||
----- |
|||||
environment |
Working temp,humidity |
-10℃~+60℃,20%~90%RH |
|||
Storagetemp,humidity |
-20℃~+85℃,10%~95%RH non-condensing |
||||
Withstand vibration |
10~500HZ,2G10min/1cycle,period for 60 minutes,each axes |
||||
safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|||
Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
||||
Fitstandard |
Safety standard |
Compliance to UL1012 |
|||
EMC standard |
Compliance to EN55022,CLASSA |
||||
others |
Dimension |
129*98*38mm(L*W*H) |
|||
Weight/packing |
0.4kg/45pcs/19kg/0.034m³/1.2CUFT |
||||
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
If you have any enquiry about quotation or cooperation,please feel free to email us at sales@hwele.net or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.